Vision Plus VP-8865KE Operating Instruction Download

Page: 28 / 36

Menu system instruction

Function

This option enables the TV to control the device linked to it.
1. Press ▲/▼ button to select “CEC Control” option.
2. Press OK button to enter the “CEC Control” submenu.

Power

1. Press ▲/▼ button to select “Power” option.
2. Press OK button to power off the device linked to the TV.

Root Menu

1. Press ▲/▼ button to select “Root Menu” option.
2. Press OK button to enter the root menu of the device linked to the TV.

Setup Menu

1. Press ▲/▼ button to select “Setup Menu” option.
2. Press OK button to enter the setup menu of the device linked to the TV.

Menu

1. Press ▲/▼ button to select “Menu” option.
2. Press OK button to enter menu of the device linked to the TV.

PVR Option

1. Press ▲/▼ button to select “PVR Option” option.
2. Press OK button to enter “PVR Option” submenu, for detailed operation refer to “PVR”.

Screen Saver

This option is only used in ATV mode.
1. Press ▲/▼ button to select “Screen Saver” option.
2. Press ◄/► button to select “On” or “Off”.

BACK

Auto Standby Off

CEC On

Signal

Back

Exit

Auto Power on On

ARC On

CEC Control

Device List

CEC Control

Power

Root Menu

Setup Menu

CEC Control

Summary of Contents for VP-8865KE





































Search results

Summary of Contents for VP-8865KE

Reviews:

Related manuals for VP-8865KE

Brands by name

Popular brands

Vision Plus VP-8865KE, Operating Instruction

Search results

Summary of Contents for VP-8865KE

Reviews:

Related manuals for VP-8865KE

Brands by name

Popular brands