12
Version 1.1.0
Release Date : Feb. 24, 2011
7-2. Setting up the menu
Settings can be made using the OSD Switch located on the back of the camera.
1. Press the button to access the SETUP mode.
The SETUP menu is displayed on the
monitor.
2. Please select any function you wish to
activate by using the UP/DOWN selections.
The cursor can be moved up or down by
using the UP/DOWN selections.
Position the cursor to point to the function
you wish to operate.
* MAIN-menu : Use UP/ DOWN selections. / SUB-menu : Use LEFT/ RIGHT selection
3. Change the status of the selected feature using the LEFT/RIGHT selections.
When the LEFT or RIGHT selection is done, available values and modes are displayed in
order.
Please keep the selection until you get to the mode you wish to operate.
4. When completed, move the cursor indicator to ‘EXIT’ position and press the Button to finish
the setting.
☞
NOTE
If
appears at the mode you wish to operate, it means that there is a sub-menu which
can be selected by OSD Switch.
