background image

WARRANTIES FOR MODELS: T8600HRC, T8600S, & T8900 (continued)

LIMITED LIGHT COMMERCIAL WARRANTY - Up to 5 hours use per day

LIGHT COMMERCIAL USES DEFINED 
VISION FITNESS warrants models T8600S & T8600HRC for use in light commercial facilities including: Hotels,
Resorts, Police & Fire Stations, Apartment Complexes, Corporate Fitness Centers, Hospitals, Rehabilitation and
Sports Medicine Clinics, where average use is up to five hours per day.

FRAME, MOTOR, ELECTRONICS, PARTS - TWO YEARS 

VISION FITNESS warrants the Frame, Motor, Electronic components and all original Parts against defects in work-
manship and materials for a period of two years from the date of original purchase.

LABOR - TWO YEARS 

VISION FITNESS warrants the Labor used in the repair of the device for a period of two years from the date of orig-
inal purchase, so long as the device remains in the possession of the original owner.

EXCLUSIVE REMEDY
The exclusive remedy for any of the above warranties shall be repair or replacement of defective Parts, or the sup-
ply of Labor to cure any defect, provided that Labor shall be limited to two years. All Labor shall be supplied by the
local Retailer and the product must be located within that Retailer's service area. Products located outside the
Retailer's service area will not be covered by the Labor warranty.

EXCLUSIONS AND LIMITATIONS
This warranty applies only to the original owner and is not transferable. This warranty is expressly limited to the
repair or replacement of a defective Frame, Electronic component, or defective Part and is the sole remedy of the
warranty. The warranty does not cover normal wear and tear, improper assembly or maintenance, or installation of
parts or accessories not originally intended or compatible with the Fitness Product as sold. The warranty does not
apply to damage or failure due to accident, abuse, 
corrosion, discoloration of paint or plastic, or neglect. VISION FITNESS shall not be responsible for incidental or
consequential damages. Parts and Electronic components reconditioned to As New Condition by VISION FITNESS
or its vendors may sometimes be supplied as warranty replacement parts and constitute fulfillment of warranty
terms. Any warranty replacement parts shall be warranted for the remainder of the original warranty term.

VISION FITNESS expressly disclaims all other warranties, express or implied, including but not limited to all war-
ranties of fitness for a particular purpose or of merchantability. This warranty gives you specific legal rights and your
rights may vary from state to state.

WARRANTY REGISTRATION
Your warranty card must be completed and sent to VISION FITNESS before a warranty claim can be processed.
You may also register via our web site at www.visionfitness.com. Inside the enclosed warranty card you will find a
customer survey. Your care in completing the survey will be of value to us in serving you in the future. Comments
and suggestions are always welcome. We are certain you will enjoy your new Treadmill. Thank you for selecting a
VISION FITNESS product.

Summary of Contents for T8100












































Reviews: