Vision Fitness T10, Owner'S Manual

Page: 10 / 24

6
POWER SWITCH
Ensure that your treadmill is
properly connected to a power
outlet, then turn on the Power
switch, located at the front of
the main frame.
SAFETY MAGNET KEY
& CLIP
Your Vision Fitness treadmill
will not start unless the Safety
Magnet Key is inserted into the
circle in the front of the console.
You should attach the clip end
to your clothing. If at any time
you need to stop the treadmill
quickly, simply pull the Safety
Magnet Key off the console.
This will cut all power to the
treadmill, and it will come to
a complete stop. To resume
your workout, place the Safety
Magnet Key back in place. This
will send you back to the start-
up mode.
GENERAL