background image

WARRANTY

WARRANTY

This product is warranted to be free from defects in material and workmanship for a period of one year 
from the date of invoice to the original purchaser.

If during the warranty period the product is found to be defective, it will be repaired or replaced at 
facilities of Vision Engineering or elsewhere, all at the option of Vision Engineering. However, Vision 
Engineering reserves the right to refund the purchase price if it is unable to provide replacement, 
and repair is not commercially practicable or cannot be timely made. Parts not of Vision Engineering 
manufacture carry only the warranty of their manufacturer. Expendable components such as fuses carry 
no warranty.

This warranty does not cover damage in transit, damage caused by misuse, neglect, or carelessness, 
or damage resulting from either improper servicing or modification by other than Vision Engineering 
approved service personnel. Further, this warranty does not cover any routine maintenance work on the 
product described in the user guide or any minor maintenance work which is reasonably expected to be 
performed by the purchaser.

No responsibility is assumed for unsatisfactory operating performance due to environmental conditions 
such as humidity, dust, corrosive chemicals, deposition of oil or other foreign matter, spillage, or other 
conditions beyond the control of Vision Engineering.

Except as stated herein, Vision Engineering makes no other warranties, express or implied by law, whether 
for resale, fitness for a particular purpose or otherwise. Further, Vision Engineering shall not under any 
circumstances be liable for incidental, consequential or other damages.

Summary of Contents for CamZ













Reviews:

Related manuals for CamZ