Vision Drive VD-1600HD, User Manual

Page: 13 / 35

General Info. _
7. Installation Procedures
Clean the area on the windshield where
the unit will be installed.
For the placement of the unit, it is better
to place the unit closer to the center of
the vehicle. If the unit is installed on the
right side of the back mirror, make sure
there is room to detach the unit if
needed.
The adhesive on the bracket is very
strong. Partially remove the cover of the
adhesive, and then use the full adhesive
surface area for final installation.
3) Connect cable and attach on windshield
4) Connect to power source to turn on the product
Insert the cigarette lighter power adapter
into an appropriate outlet.
If you start up the car or place the car
key to ACC, the product start booting up
with voice announcement.
Blinking of LED lamps notifies that the
system booting has succeeded.
DO NOT turn off the power source
while the system start-up is in
progress as this may cause damage on
product.
If power wiring is involved, we recommend a professional service for the installation.
12