9
Installation Precautions
For safe installation and operation, carefully read all the information stated
below.
DO NOT disconnect the power supply while the system is booting up.
Be aware of engine ignition switching for they may disconnect power
for short periods of time.
It is recommended to only use authorized SD cards with the VisionDrive™
products.
Install the product after parking your vehicle in a bright and safe area.
Install the system when ignition is off, especially after the power source has
been turned off completely.
Use the power cable provided with the product for the cigarette lighter power
connection for power in the range of DC12V to DC24V. If power wiring is
involved, we recommend a professional service for the installation.
Prior to the installation, clean the area of the installation where the camera will
be positioned.
DO NOT eject the SD card while the product is in operation.
