VCSBC4012.pdf – VCSBC4012 Single Board Smart Camera Operating Manual
15
Recommended driving circuit for the trigger input:
Camera side:
Pin 15 Trig In
Electrical Specification of trigger output
6
:
output voltage signal LOW:
0.4 V with 2mA output current
0.2 V with 1mA output current
output voltage signal HIGH:
2.9 V with 8mA output current
3.1 V with 1mA output current max. 3 V LVTTL
Maximum output current:
max. 8 mA (high), 2mA (low)
pull-up resistor:
none, LVTTL push-pull output
Caution: Place the connectors at the correct position – not reversed or shifted.
Recommended circuit for trigger output:
Camera side:
Pin 16 Trig Out
6
The electrical specifications given for the trigger input and output are also valid for the
remainingLVTTL IOs.
©
1996-2011 Vision Components GmbH Ettlingen, Germany
