VCSBC4012.pdf – VCSBC4012 Single Board Smart Camera Operating Manual
13
4.2.2.3
Use Power and Ethernet cable side by side
Alternatively an additional 12 pin Power Supply /PLC and a 8 pin Ethernet cable (Cable set for
VCSBC4018, VK000229 see section 5) can be used next to each other to cover all contacts. Since
only pin 1,2,5 and 6 of the 8 pin Ethernet connector are connected, place these two plugs on the J2
sockets as shown below:
Pin 1-12 use J1 cable Pin 13-20 use one of the Ethernet calbes, (pin number of connector given
here):
2
4
6
8
10 12 2
NC 6
NC
1
3
5
7
9
11 1
NC 5
NC
∇
Please refer to section 4.1.1, section 4.2.1 and sectio 5 for details on these cables.
Pin assignment Ethernet cable VK000251:
PIN (J4) Cable Color (J4)
Signal
Cable Color (RJ45)
PIN (RJ45)
1 blue
TXD+ Orange/
white
1
2 red
TXD- Orange
2
3 N/C
GND N/C
4 N/C
GND N/C
5
Pink / black
RXD+
Green/ white
3
6 green
RXD- Green
6
7 N/C
GND N/C
8 N/C
GND N/C
The change of core colors results from connecting two cables (VK000206 and a standard
Ethernet cat 5 cable).
©
1996-2011 Vision Components GmbH Ettlingen, Germany
