Vision & Control TZB38-IR850-P-24V, Instructions For Use Manual, Page: 19 / 28

TZB38-IR850-P-24V
Commissioning
6.3 Mounting the accessories
Mount the Lens Holder
a
a
1.) 2.) 3.)
1. Loosen the M5 hexagon nuts (a) on the lens holder.
2. Slide the lens holder to the desired location on the lighting.
3. Tighten the M5 hexagon nuts alternately hand-tight in small steps.
Mount the Filter adapter (slip-on adapter)
1.)
2.) 3.)
a
a
a
1. Loosen the M3 threaded pins (a) of the slip-on adapter.
2. Attach the slip-on adapter on the lighting.
3. Tighten the M3 thread pins alternately hand-tight in small steps.
Then screw the filter into the internal thread of the slip-on adapter.
© Vision & Control GmbH 2021 999.995.409.10-en-1.4 19