manualshive.com logo in svg

Vision Aerial SwitchBlade-Elite, Flight Manual

Share
Download
Vision Aerial SwitchBlade-Elite Flight Manual Download Page 27

 
 
 
 

 

27 

 

CONTROLLER 

The SwitchBlade-Elite comes with a Graupner MZ-18 Transmitter/Controller included. To 
charge the controller, plug the included charger into a wall socket and the other end into the 
charging socket on the back of the controller. Only use the included controller charger, or a 
manufacturer recommended charger. 

 

Always check the controller's battery level before flight.  

 

Always turn the controller on before powering on the SwitchBlade-Elite, and turn 
off after un-powering the SwitchBlade-Elite.  

 

Never turn the controller off during flight!  

 
For additional information see Appendix A. 
 
Keep the controller away from liquids, fire, microwaves, and other hazardous or combustible 
materials. Don’t expose the controller to extreme temperatures. If the controller is hot to the 
touch, wait for it to cool before using or charging. Perform periodic visual inspections of the 
controller battery to check for any damage, and handle the controller battery using the same 
safety precautions as the flight battery. 
 

Summary of Contents for SwitchBlade-Elite





























































Reviews:

No comments

Brands by name

Popular brands

Load more brands