VisioBraille Visio 500, User Manual, Page: 13 / 52

Getting to know Visio 500 13
5
Getting to know Visio 500
Visio 500 should now be positioned correctly and is ready to be used.
The following chapters will explain in a logical order all the functions
Visio 500 is offering.
First of all, if not happened, power on Visio 500. The power button is the
leftmost button on the control panel, which is located under the screen.
Press the power button for a few seconds, to power on the device. As
soon as the light will turn on you can release the button.
To power off the device the power button must also be pressed more
than one second. With that we make sure that Visio 500 is not powered
off unintentionally.
In case you forgot to turn off your device, we implemented a standby
function. After 30 minutes of not using the Visio 500 the lightning on the
camera and the screen will be turned into standby. You will get a
message on the screen right before it. After another two hours the device
will power off completely.
(From Firmware Version V.24) You can activate
and deactivate the standby mode by pressing and holding the autofocus
button.
(From Firmware Version V.25)
After learning how to power on and off the Visio 500, let it powered on
and put some reading material on the reading table of Visio 500. We
recommend a coloured paper or brochure. Read the following chapters
in chronological order to get familiar with all functions and learn best how
to use them.