3. Installation
The
V Inground
unit should be connected to the V Power driver. See V Power 60( or V Power 120, V Power
240, V Power 600) user manual for full details of mains power requirement, built-in programs and DMX
operation. Connect the end of the
V Inground
’s cable directly to the driver or use suitable cable joint
box(water-proof for outdoor installation) if the cable has to be extended.
For the number of V Inground projectors that can be linked together, please follow the Maximum power
output limit of each zone of the V Power.
The RJ45 plug that connects the
V Inground
unit to the V Power driver has the following wiring:
PIN Color
of
wire
RGB
1 White/Orange
Not
used
2
Orange
Red LED +
3
White/Green
Blue LED +
4 Blue
Green
LED
+
5 White/Blue
Not
used
6
Green
Red LED -
7
White/Brown
Blue LED -
8
Brown
Green LED -
RJ45 plug
(View facing pins)
4.Change Beam Angle
In this
V Inground
series, if you want to change the beam angle of fixture, you can change lens of the fixture
refer to the photo below:
5. Maintenance
- Clean the front transparent cover at least every 1-2 months. Use a moist, lint-free cloth. Never use alcohol
or solvents!
