VP-60/120
17-
9.1 RJ45 Connection
DMX Input, Output LED module Input
RJ45 Connector RJ45 Connector
Front view of the Connector Front view of the Connector
Pin 1:
Not connected
Pin 5
: Not connected
Pin 1:
Red LED +
Pin 5:
Red LED -
Pin 2:
Not connected
Pin 6:
Data +
Pin 2:
Green LED +
Pin 6:
Green LED -
Pin 3:
Not connected
Pin 7:
Data -
Pin 3:
Blue LED +
Pin 7:
Blue LED -
Pin 4:
Not connected
Pin 8:
GND
Pin 4:
White LED +
Pin 8:
White LED -
VP-60/120
2-
1. Safety Introductions
Please read the User Manual carefully as it includes important information regarding
details of operation, maintenance and technical data. Keep this manual with unit for
future consultation.
WARNING
！
●
Avoiding any flammable liquids, water or metal objects enter into the unit.
●
If any liquid spill on the unit, disconnect the power supply immediately.
●
When serious operation problem happen, stop using the unit immediately and
contact your local dealer for service.
●
Do not open the unit because there are no user serviceable parts inside.
●
Never try to repair the unit yourself. Repairs by unqualified people could cause
damage or faulty operation. Please contact your nearest dealer for any service.
CAUTION
！
●
After removed the package, make sure the unit is not damaged in any way. Don’t
use it with doubt and contact an authorized dealer.
●
Never use the unit under the excessive humidity and a temperature over 40
℃
.
●
Do not try to dismantle or modify the unit.
2. Features
●
7 Channel modes enables V Power to control passive lighting fixtures that fitted with
different LED emitters.
●
Comes with 16 built-in programs under Master/Slave mode. 3 user editable chases,
each chase up to 50 (VP-60) or 42 VP-120
）
scenes.
●
Under Manual mode, user can adjust each color’s intensity to get the best color
mixing effects.
●
White Balance setup-User can adjust the pre-set White Balance of the V Power.
●
Smooth fade in/fade out effect.
●
It can be controlled by the LED Remote Commander (LED-RC).
●
LED display for easy navigation.
