VP-60/120
9-
6. Overview
6.1 Front View
LED
1. DMX
On
DMX Input
2. MASTER
On
Master Mode
3. SLAVE
On
Slave Mode
4. POWER
On
Power on
5. Display
To show the various menu and selected function
6. Menu
Press the button to select the programming functions.
7. Down
Press the button to go backward for the desired functions.
8. Up
Press the button to go forward for the desired functions.
9. Enter
Press the button to confirm the selected functions.
VP-60/120
10-
6.2 Rear View
VP-60:
VP-120
1. POWER
Power cable for AC input
2. FUSE
For protecting the unit when the transient current is too big
3. DMX OUT
DMX Output RJ45 or 3 pin XLR socket
4. DMX IN
DMX input RJ45 or 3 pin XLR socket
5. LED
DC power & signal output for linking LED fixtures
7. DMX Controller
Using universal DMX controller to control the units, you have to set DMX address from
1 to 512 so that the units can receive DMX signal.
Press the
MENU
button up to when the
is showing on the display. Pressing
ENTER
button and the display will blink. Use
DOWN
and
UP
button to change the
DMX512 address. Once the address has been selected, press
ENTER
button to store
(or it will automatically return to the main functions without any change after idling one
minute). To go back to the main functions without any change press the
MENU
button.
Please refer to the following diagram to address your DMX512 channel for the first 4
units.
