11A
button and the display will blink. Use the
DOWN
and
UP
button to select the
(normal)
or
(inverse)
，
Once the mode has been selected, press the
ENTER
button to setup or
automatically return to the main functions without any change after one minute. To go back to the
previous functions without any change press the
MENU
button.
Auto Test
Press the
MENU
button up to when the
is blinking on the display. Press the
ENTER
button and the unit will run self-test by built-in program. To go back to the functions press the
MENU
button again.
LED Display
Press the
MENU
button up to when the
is shown on the display. Press the
ENTER
button
and the display will blink. Use
DOWN
and
UP
button to select the
(display is always on)
or
(display off 20 seconds after exit menu) mode. Once select, press the
ENTER
button
to setup or exit menu mode without any change after one minute. Back to the functions without any
change press
MENU
button again.
Temperature Test
Press the
MENU
button up to when the
is blinking on the display. Press the
ENTER
button and the display will show the temperature of the unit. To go back to the functions press the
MENU
button again.
Fixture Hours
Press the
MENU
button up to when the
is blinking on the display. Press the
ENTER
button and the display will show the number of working hours of the unit. To go back to the
functions press the
MENU
button.
