WiFi Microscope User Manual
Page 4 of 31
Safety Cautions
1.
Avoid touching the lens.
2.
Protect the product from electrostatic damage.
3.
Do not attempt to disassembly any part of this product.
4.
Do not attempt to service this product yourself. Opening the covers may expose you to dangerous
voltage points or other risks.
5.
Store and operate WiFi Microscope at Temp: -20 ~ 45
°
C,
Humidity: 45% ~ 85%, storing and
operating outside these limits may reduce the life of the product.
6.
Do not expose this product to water or other liquids. If water or other liquids enter the product,
immediately power off the product. Continued use of the product may result in fire or an
electrical shock.
7.
Do not use any detergent or volatile solution, as this will damage the camera case, painted
surfaces and lens. To clean the product uses only a soft cleaning cloth.
8.
Do not place this product near a heat source or expose direct flame, avoid the lens damaged by
high temperature or humidity
9.
If the lens is dirty, please use a kens brush on soft cloth to wipe clean.
Avoid touching it with your
fingers. Exercise care to avoid scratching the lens.
10.
Need to read WiFi Microscope User
’
s Manual before using and storing it.
11.
To avoid electric shock, remove all electricity source before removing PC.
