VWR_Quick_Guide_VisicamTC20plus_Jan16_rev0.docx
4
/
4
5.
HOW TO PREVIEW AND CAPTURE AN IMAGE
After you login, touch PROJECT/NEW in the commands bar (right part of the screen), and you will see the
live image coming from the camera (microscope and camera must be properly switched on)
To capture the image
: put the camera/video switch on the left position, then click on the IMAGE CAPTURE
button. After few seconds the captured image will be shown, if you are satisfied confirm by pressing the
button. This will close the preview image pane and the image will be shown on the main window
To record a video:
put the camera/video switch on the right position, then click on the RECORD VIDEO
button. To stop the video recording, press the “VIDEO RECORD STOP” button. Now you can choose the
name you want to give to the just recorded video.
6.
SYSTEM SWITCH-OFF
1.
Exit the application Tabkam View and Switch off the Tablet (press the Tablet power button)
2.
Switch off the camera (put button on left position) and then unplug the 5Volt power supply of WiFi
camera from electrical mains of your laboratory
COMMANDS bar
Current user
Current window
name
Undo/Redo
buttons
Current activities
available
AREA of the image from Microscope
IMAGE / VIDEO
switch
IMAGE CAPTURE
button
