SMARTWAV 2 + MIDI ADAPTER UPGRAGE DRUM MODULE SOUNDS
Quick Guide
Vizic Technologies ©2020 | 16
5- Getting Ready - Roland® TD-25
5.1- Hardware Connections
While all hardware is powered OFF:
-Push and rise the hinge of the microSD card socket, place and fit the
microSD card, close the hinge, then pull to lock and secure the
microSD card from falling.
-Connect one side of the 5-pin MIDI cable to the MIDI OUT jack of the
drum module, then connect the other side to the MIDI IN of the
Sma MIDI Adapter board.
-Connect one side of a 3.5mm stereo cable to the aux input of the
drum module, insert the other side to the 3.5mm to 1/4” adapter and
then plug the adapter end to the TRS STEREO 1/4” labeled input of
Sma MIDI Adapter board.
-Roll the volume potentiometer of Sma MIDI Adapter to the
lowest position.
-Plug the DC adapter power supply to the Sma MIDI Adapter
DC Jack input, the blue LED must power on.
-Turn On the TD-25 module and slowly adjust volumes.
5.2- MicroSD Card .wav Files
The inserted microSD card must be loaded with .wav samples
according to the previous document section 3. The TD-25 module
support/send PC commands when a drum kit is selected, .wav files
must be loaded inside 000 to 035 named folders, the TD-25 has 36
selectable kits (0 to 35). As an example if the first available kit is
selected (Program change #000), then .wav samples of folder 000 will
be triggered.
