MBU-3000 User Instruction
17
14. Voice Assistant Activation (SIRI function activation)
SIRI assistant on your iPhone can be wirelessly activated via
MBU-3000. To activate SIRI wirelessly dial 7*7 and press the Call
button
. When hearing the SIRI beep speaks like handsfree to ask
SIRI to send SMS, read a new SMS, jolt down a note or even to call
some one for you. Once activated you have 60 seconds to perform
the function. If you wish to perform another one before the 60
seconds end you will need to press Hang-up button
to end the
activation before you can activate it again.
Note:
This function will work with iPhone 4S or iPhone 5 SIRI and other phones that are
equipped with compatible voice command functions.
Once you activate SIRI using Comand console keypads MBU-3000 will open up the
microphone and speaker for 60 seconds. During this time if SIRI asks you questions
back then you will be able to talk to SIRI without reactivation. If you do not hear the
beeping sound from SIRI or if SIRI has completed the task you have just requested
before the 60 seconds end you will need to press the Hang-up button
before you can
use 7
＊
7 command again.
If you make a call via SIRI, in-car speakers and microphone should remain open through
out your call.
It is advised that you try out the SIRI activation function a few times while car is stationed
just to get a feel how to operate it from your Comand console.
SIRI, iPhone 4S and iPhone 5 are the products and registered trademarks of Apple Inc.
Warning! You should pay attention to the road at all time when driving. Do not
attempt to use this function while driving through a complicated traffic area.
15. Soft Reset
To soft reset the device, simply press the Reset button at the bottom
of the device. This will cause a temporary disconnection between
MBU-3000 and your mobile phone. When reconnected, MBU-3000
will restart the sync process (please make sure the sync function of
MBU-3000 is switched on).
