Viscount Vivace 20, User Manual

Page: 56 / 112

54
Viscount Vivace 40 Deluxe - 40 - 30 Deluxe - 30 - 20 Owner’s Manual
IMPORTANT NOTES
- The voices for loaded for each stop are automatically saved in the current Organ Style (see also
section 4). This means that when another style is recalled, the voices will be reset to the last style
recalled. When the style in which the voices were changed is reloaded, the voices will be reset to
the latest adjustments.
-
When a replacement voice is loaded, it will be assigned the volume value set for the voice
present on the relative stop before the change was made.
- To restore the original voices of all the styles or one in particular, recall the FACTORY SETTING
function described in point 8.1.
5.3 CHECKING THE STOP LABELS
After a different style has been selected or alternative voices have been loaded, there is the risk that the
labels on the stops no longer correspond to the voices which they recall. You will therefore need to check
the correspondence between the voice and the label, and replace the label if it is no longer correct.
The SOUND CHECK function is available for this purpose. To activate this function, select the SOUND
CHECK field in the VOICES menu with the aid of the usual selection buttons. The video page displayed
is as follows:
The STOP field contains the number of the stop being checked (which will be illuminated on the panel),
while the bottom line contains the voice currently associated to the stop concerned.
SECTION
indicates the section to which the stop belongs.
You can scroll through all the registers using the [VALUE +] and [VALUE -] buttons or by pressing the
stops themselves.
Once you have checked the labels of all the stops, press [EXIT] to return to display of the VOICES menu.
CHANGING LABELS
As we have seen, once you have selected a style or loaded replacement voices it may be necessary to
change the labels of the stops, since several voices will have changed and the name of the stop will no
longer correspond to the name of the register and voice loaded in the memory. However, it is very easy to
change the labels because they are just pressed into the stop. Remove the label with your fingers or using
a small screwdriver (as shown below) and fit the correct one. In order to buy new register name plates,
please get in touch with your dealer.
____SOUND àçäàê_____
STOP: 1
Prinzipl16B
SECTION: PEDAL