Viscount RD-70, Quick Reference Manual

Page: 17 / 46

REW STOP PLAY PAUSE REC FF
SINGLE
SINGLE
PROGRAM
PROGRAM
ERASE
ERASE
TEMPO
TEMPO
SONG
SONG
ENTER
ENTER
RANDOM
RANDOM
STANDBY
STANDBY
REPEAT
REPEAT
SINGLE
PROGRAM ERASE
TEMPO SONG
ENTER RANDOM
STANDBY REPEAT
REW STOP PLAY
PLAY
SINGLE
STOP
PAUSE REC FF
2.9SINGLE Function
2.10 AUTOREW Function
2.11START/STOP Pedal Control
* The way in which the initial parameters (see 3.6 PROGRAMMING) have
been set causes the RD-70 to automatically read all of the songs on a floppy
disk in sequence, going from first to second and so on to the end. In order to
change this, simply select the SINGLE mode.
1) Press the SINGLE button. Actuation of the SINGLE mode will be signalled by
the relative LED which will light up.
Once the RD-70 is in SINGLE mode, it will stop after each song.
* The autorewind function allows the STOP button to operate in two different
ways:
1) AUTOREW on: when you press STOP, the player will go back to the
beginning of the song that has just been played back.
2) AUTOREW off: when you press STOP, the player will stay at the point where
playback was stopped.
* By holding ENTER and also pressing STOP, the status of the AUTOREW
function will be shown on the display. It can be changed (on/off) using the
REW or FF buttons and confirmed with ENTER.
* The AUTOREW off function can be useful when the pedal (optional) is used
for START/STOP commands.
2.8AUTOPLAY Function
PLAYBACK
* Playback of the songs can be automatically started immediately after
inserting the floppy disk in the drive unit (AUTOPLAY ON) by means of a simple
procedure:
1) While holding the ENTER button press PLAY: the current status of the
AUTOPLAY function will appear on the display.
2) Press REW or FF to change the status of the function as desired (on/off).
3) Confirm the change by pressing ENTER.
* A footswitch with a normally-open contact can be connected up to the
appropriate jack (see rear pannel diagram) for remote control of START and
STOP functions. In order to avoid serious demage to the equipment, ONLY
footswitches of the raccomanded type should be used.