background image

78

Viscount 

Physis Organs

Reference Manual

As in Play mode, the screen again carries information about the functions of   the buttons:

-    

[ENTER]

: starts the recording.

-    

[EXIT]:

 quits the sequencer function.

Once recording has started, the functions change to:

-    

[ENTER]

: pause /restart recording.

-    

[EXIT]

: stop recording.

Press [EXIT] to end the session. The display will show the screen allowing the recording just made to be
saved:

The functions displayed allow:

o

SAVE: 

saving of  the recording as a MIDI file.

o

PLAY:

 playback of  the recoding before saving it.

o

OVERDUB: 

creation of  a new recording to be added to the sequence just acquired.

o

DISCARD AND EXIT: 

delete the recording and quit sequencer Record mode.

If   the SAVE field is selected, the system prompts the user to assign a name to the MIDI sequence about to
be saved:

When composing the name, use the [FIELD  ] and [FIELD  ] buttons to move the cursor and [VALUE +]
and [VALUE -] to select the character. The first three characters can only be numbers, since they are required
for future expansions of   the instrument.
To confirm the name and proceed to save the data, press the [ENTER] button; use [EXIT] to return to the

Summary of Contents for Physis















































































































Reviews: