Viscount Physis Reference Manual Download

Page: 72 / 110

Viscount

Physis Organs

Reference Manual

If there is already a file of the same name in your memory unit, the display will show:

Press [ENTER] to overwrite the old file or [EXIT] to quit and return to the file rename screen.

N.B.:

The content of an overwritten file will be irreparably lost.

The first three characters of a .mid file name must be digits, followed by “_”.

The system does not allow two .mid files on the same memory to have names beginning with the
same three characters.

Then press [ENTER] to confirm.

11.6 DELETING FILES (DELETE function)

When you wish to eliminate one or more files from the current memory, recall the DELETE function from
the FILE MANAGEMENT menu.

Press [FIELD ] and [FIELD ] to scroll the file list and select the file you intend to delete, then press
[ENTER] (see next page).

Summary of Contents for Physis















































































































Search results

Summary of Contents for Physis

Reviews:

Related manuals for Physis

Brands by name

Popular brands

Viscount Physis, Reference Manual

Search results

Summary of Contents for Physis

Reviews:

Related manuals for Physis

Brands by name

Popular brands