29
Viscount
Ouverture
User Guide
13. APPENDIX
13.1 STOP LOCAL OFF
Setting a stop in Local Off mode means that it will not be played by the organ’s internal sound generation
system, but the relative MIDI (System Exclusive code) message will be transmitted, so that it can be turned
on and played on a connected instrument.
To set a stop in Local Off mode, while the main screen is on the display, press the [S] (Set) piston, keep it
pressed and also press the [C] (Cancel) button. The LEDs of all the stops will light up and the display will
show the video page:
To set a voice in Local Off mode, operate its draw-stop or rocker switch so that its light goes out.
After setting the setup required, press [S] and [C] together to save it.
Accessing the Local Off setting function after this will trigger display of the status of the stops as follows:
- Light on: stop in Local On mode (plays with internal generation)
- Light off: stop in Local Off status
13.2 FACTORY SETTINGS
The Factory Setting procedure allows restoration of the factory settings of all the instrument’s internal
functions, deleting all the changes made by the user.
The
Ouverture
organ also allows the user to choose which settings are to be returned to the default values.
To recall this function, select the RESTORE FACT. SET display field in the second page of the
UTILITY&MIDI menu:
The following can be initialised:
o
ENTIRE ORGAN:
all the organ’s settings and functions (TUNING, SET-UP and UTILITY & MIDI
menus, the four User Styles, all the general and divisional combinations, Tutti and Crescendo and stop
Local Off status).
