VISCOUNT
CM-100
Pipe Organ Module
Page 18
ENGLISH
6. VOICE
6. VOICE
CHANGE
CHANGE
As already mentioned at the beginning of this manual, the CM 100 has a library of
176 organ voices
which the user can
freely assign to each of the 12 stops on the instrument's front panel
.
Once the voice has been assigned to a stop, it will remain in the memory until the next time it is changed.
Now let us take a detailed look at how to carry out the procedure for changing a stop's voice:
6.1 V
6.1 V
oice Change
oice Change
Starting from the main page, press the
VOICE
key. The video page with the function's menu will appear
on the display:
[EDIT]
[CHANGE]
[VOLUME]
[OUT ROUTER]
[V.F.S.]
[LABEL CHECK]
[SORT VOICES]
Ctrbomb32
Bombard16
Bombarde8
Schawm4
Waldhrn16
Cornopea8
Replace:CtBourd32
With:Principals press ENTER to continue
Replace:CtBourd32
With:CtPrinc32
Press ENTER to replace
You can now turn the encoder to select the voice of your choice, contained in the family you choose in
the step before. Note that the name of the voices is shown in abbreviated form: the appendix to this
manual contains the name of the voice in full, its acronym, the family to which it belongs and the
consecutive number consigned to it.
Remember that when you are selecting a voice, the instrument allows you to listen to it in advance: if you
play the master instrument, you will hear the timbre of the voice currently on the display, before it is
definitively memorised.
For greater convenience, the CM100's voice library has been subdivided into families, each containing
the voices belonging to a specific type of organ pipe: these include the Principals, Bourdons, Reeds, etc.
So on the current page,
turn the encoder
to select the family you require and press
ENTER
to confirm.
(or exit to go back)
Then use the
cursor keys
to select the voice you wish to replace; you can also do this by
pressing the
stop
of your choice on the front panel.
If the selection is confirmed by pressing
ENTER,
the display will show
Use the cursor keys to select the
CHANGE
menu option, which will start to flash. Press
ENTER
and the
display will show the list of voices currently installed on the 12 stops: the stop currently selected will flash
