41
Viscount
Chorum
User Manual
If [EXIT] is pressed while in the save screen (i.e. when the recording has been acquired but not saved), the system
warns that the recording is about to be lost:
and that [ENTER] must be pressed to confirm that you wish to quit and delete the data acquired, or [EXIT] to
return to the save screen.
8.3 OVERDUBBING A SONGS (OVERDUB mode)
The internal sequencer record, play, but also overdub already recorded MIDI tracks. It can be done accessing the
OVERDUB function:
-
in the Sequencer main page (see the beginning of chapt .8) and selecting a MIDI file;
-
at the end of a recording session (see par. 8.2).
The system will ask whether to substitute the settings (stops, coupling, tremulant, MIDI controls, general
controls) recorded in the track with the ones currently selected. Press [ENTER] to use the new settings or [EXIT]
to leave them as they are.
The system will ask the same question, this time regarding the divisional volumes and expression pedal.
N.B.
-
The system displays the error message “
USB PEN NOT PRESENT
” when trying to save a
MIDI sequence without a USB drive connected to the instrument, or when the pen drive has
not been recognized. Should this happen, check that the pen drive is not damaged and has the
correct format.
-
In the case of "
FILE SAVE FAILED
" error, retry the operation. If the error occurs again,
check that there is enough space in the USB stick. If the error still occurs, the USB stick could
be damaged so try using a different stick or format it with a computer.