Viscount CANTICUS I - II
50
',2- C 30#T
.31& R 2- !-,$'0+ -0 2- -02
Press EXIT to abort the operation or press the CURSOR
Ö key again to start the process: the floppy disk drive LED
illuminates then for a few moments and the display will show:
',2- C
1202#"C 5'2 #," -$ "'1)
When the operation is complete, the alphanumeric display returns to the video page for regulation of the volume levels.
You are urged to pay special attention to the 3 digit display of the control unit: if the message "Dpr" (disk protected)
appears instead of the number allocated to the file, you have inserted a floppy disk with writing protection. Extract the
floppy disk, remove the protection (by moving the shutter in the top right-hand corner of the disk) and repeat the operation,
since the file has not been saved.
If the error "Der" (disk error) appears, the disk you have inserted has not been formatted; format it (point 4.4) and repeat the
saving procedures.
6.2 LOADING VOICES FROM DISK
Insert the disk containing the voice programming in the Canticus floppy disk drive; after a few moments, the number 001
will appear on the 3 digit display on the floppy disk section of the central unit.
Check that the green LED on the PLAY key is out and otherwise press STOP.
Then press the SETTING key and the following message will appear on the alphanumeric display:
$0-+ C
1#*#!2 -, "'1) ," .31& R
With the aid of the SONG
Õ and Ö keys, select the number of the file containing the voice data to be loaded into the
internal memory of the instrument on the 3 digit display.
Use the CURSOR
Ö key to confirm the selection made. The alphanumeric display will show:
$0-+ C 30# T
.31& R 2- !-,$'0+ -0 2- -02
Press EXIT to abort the operation or the CURSOR
Ö key to start loading the voice programming data (the floppy disk drive
LED lights up).
SONG Key
3 Digit Display
