eco-SPRAY
Commissioning and maintenance instructions
Copyright ©
Version 1.0
13 / 19
• Dock the assembly aid (6) with the star-shaped coupling (5) on the dispenser
housing (10)
• Turn the assembly aid (6) in the direction of the arrow. The stator (7) will be pushed so
far out of the dispenser housing (10) by the rotor assembly (4) that the dowel pin (8) is
no longer in the groove (9)
• Uncouple the assembly aid (6) from the dispenser housing (10) and completely remove
the stator (7) from the rotor assembly (4) by turning and pulling
• Unscrew four screws (26) and pull off the pump housing (19) from the bearing
housing (13)
6
5
10
7
8
9
4
Fig. 11
26
13
19
26
23
Fig. 12
