9
After Sales Support
Telephone:
1300 886 649
Instructions (Cont.)
Clipping hair
•
Before clipping hair, make sure the hair is clean, dry and
product-free. Do not use the hair clipper on wet hair.
•
Comb your hair in growth direction before clipping it.
•
Align the hair clipper nozzle on top of the shaver, then press
down the hair clipper head firmly until you hear it click into
place (Fig. 5).
•
Put the hair clipper comb into the slots on both sides of
the clipper head. Make sure both sides of the comb are
firmly attached to the hair clipper head (Fig. 6).
•
The reversible hair clipper comb can be used for clipping
hair down to two different lengths (3mm or 6mm). Attach it
onto the hair clipper head in the direction of your desired
hair length, as marked on the underside (Fig. 7).
•
To remove the hair clipper comb, gently pull off one side,
then the other (Fig. 8).
•
Press the ON/OFF button to start clipping your hair.
Starting at the back of your head, move upwards towards
the crown. Continue working around the sides of your head
and then finish off with the top of your head. Trim around
the neck and behind the ears.
•
For a good clipping effect, move the clipper against your
hair growth direction.
Fig. 5
Fig. 6
Fig. 7
Fig. 8
