ViSAGE HCI004, Instruction Manual, Page: 10 / 16

10
AFTER SALES SUPPORT
YEAR WARRANTY
1
MODEL: HCI004 PRODUCT CODE: 49555 04/2015
customercare@winplus.com.au 1300 663 907
AUS
Instructions
Use
1. Select your desired barrel to use.
2. Insert the barrel into the Hair Curler, ensuring the flat edges
line up. The barrel should lock into place by the internal
magnets.
3. Plug the Hair Curler into a mains power outlet and turn on.
WARNING: If the barrel does not connect in the to handle firmly,
do not use, contact customer service immediately.
NOTE: The safety rest should be facing opposite the control panel.
4. Hold the On/Off button for 3 seconds to turn On.
5. The display will be flashing. Use the + or – buttons to
set the desired temperature. After a few seconds the set
temperature will automatically lock; this will be evident by
the symbol being displayed.
NOTE: The default temperature is 130°C, you can change the
temperature in 10°C increments up to 200°C.
WARNING: The curler will start heating straight away. Do not
touch the barrels when in use as there is a risk of being burnt.
6. Once the set temperature has been reached, the display will stop flashing and the curler is
ready to use.
7. To change the temperature again, press and hold the Timer/Lock button until the symbol
disappears. Use the + or – buttons to change the temperature.
NOTE: If you select a lower temperature than already set, the unit may take some time to cool
back to that temperature. It is recommended to set a lower temperature first.
WARNING: Always use the Hair Curler with the included glove. Take extreme care to avoid
contact between the hot barrels and skin.
8. When finished, hold the On/Off button to switch off. Utilise the safety stand on the barrels
to rest the Hair Curler whilst it cools down.