Troubleshooting
15
AFTER SALES SUPPORT
GB IRE
GB
0800 / 328 6020
IRE
00800 / 4467 5888
WARNING!
Risk of burns!
The hairdryer and the styling nozzle become very hot during use
and may cause burns.
− Let the hairdryer and the styling nozzle cool down completely
before cleaning.
NOTE!
Risk of damage!
Improper handling of the hairdryer may result in damage to the
hairdryer.
− Do not in any case use hard, scouring or abrasive cleaners or
similar to clean the hairdryer. These could scratch the surface.
1. Turn the air filter
1
a little anti-clockwise and then pull the air filter off the haird-
ryer (see
fig. B
).
2. Use a small brush to clean dust and hair out of the air filter. Fit it back on and then
turn it clockwise to lock it.
3. If necessary, pull off the styling nozzle
3
.
4. Clean the housing and/or the styling nozzle with a soft cloth, slightly dampened if
necessary. Make sure that no water penetrates the inside of the hairdryer.
Troubleshooting
Problem
Possible cause
Solution
1. No function.
The mains plug has
not been inserted.
Insert the mains plug.
2. Hairdryer switches
off during operation.
The overheat
protection has
triggered.
See chapter
“Overheat protection”.
Summary of Contents for GT-HDi-09-UK
Page 4: ...A 1 2 4 5 6 3 4 GB IRE...
Page 5: ...B 5 GB IRE...
