Overheat protection
14
AFTER SALES SUPPORT
14
GB IRE
GB
0800 / 328 6020
IRE
00800 / 4467 5888
Switching off the hairdryer and removing the styling nozzle
WARNING!
Risk of burns!
The hairdryer and the styling nozzle become very hot during use
and may cause burns.
− Allow the hairdryer, styling nozzle and diffuser to cool down
after use.
1. Set the fan speed switch
4
to
O
.
2. Pull the mains plug out of the socket.
3. Let the hairdryer cool down.
4. Pull off the styling nozzle
3
.
Overheat protection
If the air inlet is restricted, the integrated overheat protection will switch off the haird-
ryer. Proceed as follows:
1. Set the fan speed switch
4
to the
0
position.
2. Pull the mains plug out of the socket.
3. Let the hairdryer cool down completely.
4. Clean the air filter
1
(see chapter “Cleaning”).
You can then operate the hairdryer again.
Storing the hairdryer
1. Let the hairdryer cool down completely before you store it.
2. The hairdryer has a hanging loop
2
that you can use to hang it up.
Cleaning
WARNING!
Risk of electric shock!
Liquid that has penetrated the hairdryer may result in an electric shock.
− Do not immerse the hairdryer, the mains cord or mains plug in
water or other liquids.
− Pull the mains plug out of the socket before cleaning the hairdryer.
Summary of Contents for GT-HDi-09-UK
Page 4: ...A 1 2 4 5 6 3 4 GB IRE...
Page 5: ...B 5 GB IRE...
