Operation
19
− As additional protection, it is
recommended that you install a residual
current protective device (RCD) with a
release current of no more than 30 mA
in the power circuit. Ask your electrician
for advice. Have it installed by an
electrical installation technician.
• The hair you intend to trim must be dry.
• The length of the cut may vary depending on
the trimming angle.
• Begin with a comb attachment for a longer
cutting length and then use progressively
shorter cutting lengths as you progress with
the haircut.
Irrespective of the charge level of the rechargeable battery,
you can use the hair trimmer in mains mode at any time.
1. For mains mode operation, make sure that the hair
trimmer
1
is switched off.
2. Take the barrel plug
8
out of the charging station
9
.
3. Insert the barrel plug in the connection point of the hair
trimmer.
4. Insert the AC adapter plug
6
in an easily accessible
socket.
5. Use the On/Off switch
3
to turn the hair trimmer on.
6. Use the sliding switch
4
for fine adjustment. You can
choose from three settings (see
Fig. E
).