![background image](http://html1.mh-extra.com/html/visage/18163902/18163902_user-manual_1030648016.webp)
Charging
16
− Be very careful when opening it.
1. Take the grooming kit out of the packaging.
2. Check to make sure that the delivery is complete
(see
Fig. A
–
C
).
3. Check whether the grooming kit or the individual parts
exhibit damage. If this is the case, do not use the grooming
kit. Contact the manufacturer at the service address
specified on the warranty card.
Charging
Preparing the charging station
1. Turn the charging station
9
over.
A round opening covered by a locking mechanism is
located on the front edge at the bottom of the charging
station.
An oval recess
23
for the mains cord
7
of the AC
adapter plug
6
is located along the back edge.
2. Push the locking mechanism
22
to the side (see
Fig. F
).
3. Run the mains cord through the oval recess (see
Fig. G
).
4. Insert the barrel plug
8
through the round opening so
that the jack extends into the charging station.
5. Then turn the locking mechanism 90 degrees over the
barrel plug.
The locking mechanism must noticeably lock into place.