5
2. TECHNICAL CHARACTERISTICS
Power max......................................................2300 W
Cooling...........................................................by-pass
Air delivery..................................................340 m
3
/h
Water column vacuum...........................2200/mm H
2
O
Container capacity..............................................72 l
Remote control socket.............................1500 W max
Weight................................................................25 Kg
3. STANDARD EQUIPMENT
Inside the box you will find the following components:
1. One AS382L dust collector - Ref 8200300
2. One flexible tube with connectors for EB35 - Ref
8299204
3. One aspirator control cable for EB35 - Ref 8245458
4. Various documents
4. DESCRIPTIÓN
A - Polyester filter to set into the tank to pick up dust,
and to remove for liquid suction.
B - Filtering cartridge for very fine dust. To be removed
for liquid suction.
C - Suction inlet
D - Connection base to EB35
E - Flexible tube with connectors for EB35
F - Tank.
G - Outlet for electric tool.
H - Switch.
I - Float. Designed so that the liquid collected does not
get into the motors during collection.
J - Motor block.
K - Hooks for tightening of motor block to tank.
In order to keep in good efficiency the
machine it is useful to clean the filters
after each utilization.
5. OPTIONAL ACCESSORIES
8246233 Dust collector kit (Fig. A), comprising:
1.
8299157 2-m flexible hose
2.
8299158 Dual-purpose brush
3.
8299159 Liquids brush
4.
8202131 Flat nozzle
5.
8299092 Round PVC brush
6.
8202316 Tube
7.
8203317 Elbow tube
8.
8202134 Triangular nozzle
8299173 Y-connector D.32 (Fig. A)
8299161 Paper filter bag for AS282K and AS382L
FITTING THE DUST BAG
Only use the dust bag together with the filter car-
tridge.
The bag collects all the dust in conditions of hygiene.
If sucked in along with the dust, sharp or wet items
could damage the dust bag.
Change the bag when it has filled to two thirds with dust.
The bag cannot be reused. It must always be changed.
6. USING WITH EB35 EDGEBANDER
Before using the dust collector, please ensure:
- That filter sack A (Fig. 1) or the paper filter bag has
been correctly inserted inside the dust collector.
- That supplementary filter B (Fig. 1) has been correctly
inserted in the upper part of the body.
Next:
- Insert the dust collector tube into opening C (Fig. 4) of the
dust collector and into the socket of machine N (Fig. 4).
- Connect control cable L (Fig. 5) to dust collector
connection base D (Fig. 5) and to machine connection
base M (Fig. 5).
- Plug the dust collector into a power socket and put
switch H (Fig. 5) into position "II". Once in this position,
when the trimmers of edgebander EB35 are working,
the dust collector will automatically switch on, and will
continue to function for approximately 5 seconds after
the trimmers have stopped.
Never connect edgebander EB35 to
supplementary socket G (Fig. 5) of the
dust collector.
7. DRY SUCTION / OPERATING INSTRUCTIONS
- Insert the filters A and B (Fig. 1 and 2). If a paper
filter bag is used, install only the cartridge for filter
B (Fig.2).
- If a paper bag is provided, insert it in the tank on
the deflector.
- Assembly the head on tank and block it by hooks K,
(Fig. 1).
- Connect the flexible E hose to the inlet C (Fig. 1).
- Connect the plug to a power socket and turn switch
H (Fig. 5).
8. LIQUID SUCTION /
OPERATING INSTRUCIONS
- Remove the filters A and B (Fig. 1 and 2)
- Assembly the head on tank and block it by hooks K
(Fig. 1).
- Connect the flexible E hose to the inlet C (Fig. 1).
- Connect the plug to a power socket and turn switch
H (Fig. 5).
If you wish to use the machine for dust collection again,
the filters must be replaced in their original positions.
