12
• Fumes may be aired if there is battery damage and
improper use. In this case, go to a well-ventilated location
and seek medical assistance, if necessary. Fumes cause
respiratory irritation.
• When the battery is defective, the liquid may leak and
come into contact with adjacent components. Check the
corresponding parts. Clean or replace them, if necessary.
• Protect the battery from heat, continued solar radiation
and fire. There is an explosion hazard.
Read all instructions and safety warnings.
• Protect the battery charger from rain and moisture.
Water entering the charger increases the risk of electric
shock.
• Do not charge other batteries. The battery charger is
only suitable for charging lithium-ion batteries within
the indicated voltage range. Otherwise, there is a fire
and explosion hazard.
• Keep the battery charger clean. Dirt can cause a risk
of electric shock.
• Always check the battery charger, its cable and plug
before using them. Do not use the charger if you see it
is damaged. Do not open the charger on your own. Have
it repaired by a qualified person who uses original spare
parts. Damaged chargers, cables and plugs increase the
risk of electric shocks.
• Do not use the battery charger on highly flammable
surfaces. For example, paper, textiles, etc., or in com
-
bustible environments. A fire hazard exists from the
charger heating during the charging cycle.
2. SPECIFICATIONS
Battery voltage.........................................................20 V
Strokes per minute.......................................700-3000/min
Battery type......................................................................Li-Ion
Time to charge battery..................................................60 min
Battery capacity..............................................................2 or 4 A
h
Stroke Length................................................................26 mm
Pendular movement..........................................................Yes
Angle capacity of base (left and right).......................45º/45°
Variable speed..........................................................Yes
Quick fixing system.............................................................Yes
Wood cutting capacity..............................................85 mm
Aluminium cutting capacity......................................20 mm
Steel cutting capacity....................................................10 mm
Weight without battery....................................................2.3 Kg
Weighted equivalent continuous acoustic
pressure level A...........................................................87 dBA
Acoustic power level A............................................98,5 dBA
Wear ear protection!
Vibration total values..............................................a
h
: 3,5 m/s
2
3. COMPONENTS
1. On / off switch
2. Lock-off button
3. Ventilation slots
4. Battery lock *
5. Indicators of the state of battery charge *
6. Control button of the state of battery charge *
7. Battery *
8. Protective cover
9. LED lamp
10. Contact protector
11. Saw holder
12. Guide roller
13. Lever for pendulum stroke adjustment
14. Base plate
15. Plastic overlay
16. Thumbwheel for stroke rate selection
17. Allen key
18. Saw blade *
19. Charger * (Fig. 4)
20. Label * (Fig. 4)
21. Indicator (red) * (Fig. 4)
22. Indicator (green) * (Fig. 4)
23. Base plate mounting bolt (Fig. 7)
24. Scale (Fig. 8)
* Not included
4. STANDARD ACCESSORIES
• Plastic overlay
• Allen key
• Operating instructions
• Warranty
5. SPECIFICATIONS OF THE TOOL
Brushless motor
Power tool equipped with a brushless motor that pro-
vides the following advantages (compared to the power
tool having a brush motor):
• High reliability due to the lack of wearing parts (car-
bon brushes, commutator).
• Increased operating time on a single charge.
• Compact design and light weight.
Temperature protection
The temperature protection system enables to auto-
matically deactivate the power tool in case of excess
load or when the temperature of the battery 7 (Fig. 0)
is exceeding 70°C. The system guarantees protection of
the power tool from damage in case of noncompliance
with the operation conditions.
