VirtuFit Water Resistance Row 800 Rowing Machine
12
EN
FILL AND EMPTY THE WATER TANK
21
100
D .
NOTE!
• Fill the tank with municipal water, do not use well water. If municipal water is unavailable, use
distilled water. Refer to the Maintenance section for recommendations on water treatment.
• The water in the tank is not human or animal consumption. Please dispose of the water properly
after removal from the tank.
FILL AND EMPTY THE WATER TANK
21
100
101
1
2
3
4
5
6
7
8
C .
18
C .
• Remove the Fill Plug(21) from the upper tank(18). To fill
with water, refer to illustration C. Place the Funnel(101) into the
tank. Use a water cup, or the Syphon Pump(100) and a bucket to
fill the tank. Use Water level gauge on the side of tank to
measure volume of water in tank to the desired level.
• To empty the tank, refer to illustration D. Place a bucket next to
the rower. Use the Syphon Pump(100) to pump out the water in
the tank to the desired leve.
• Once completed, inset the Fill Plug(21) into the Upper Tank(18).
Please wipe excess water from the frames after filling.
WATER LEVEL
Refer to the detail view of illustration C. The water level
gauge is positioned on the side of the tank. DO NOT fill
above the Maximum level - this could void the warranty.
The amount of resistance is dictated by the amount of water in the
tank. For example level 2 of water offer light resistance, Level 6 offers
a heavier resistance.
