VirtuFit Ultimate Pro 2i Ergometer Rowing Machine
19
EN
CONSOLE
5. During the RACE program, the following metrics “TIME / STROKES / CALORIES / WATTS /” will count up. The
METERS metric will count down to your target race distance.
6. During the race, the dot matrix will show YOUR position and the COMPUTER’s position; the monitor will
display the meter distance between the two. After the end of the race, the computer will show either the
COMPUTER or YOU as the winner.
7. If you stop rowing, the time shown on the lower right window of monitor will pause. When you start
rowing again, it will continue operating from where you left off.
8. Press the STOP button to pause the monitor.
3. INTERVAL - PROGRAM
1. In the start menu, use the “UP / DOWN” key to select
INTERVAL, and then press the ENTER key to choose the
program.
2. Note that the program has default settings for
the number of intervals, work time, rest time, strokes,
calories and meters.
You can change any of the defaults with the
directions below. At any time, press START or
begin rowing to begin the program with the
default settings or mix of your changes and
default setting.
3. When the user selects the INTERVAL program, the
program defaults to 10 intervals.
4. You can use the “UP / DOWN” button to change the
number of intervals. Press the ENTER key when you are
finished.
5. Once your number of intervals is set, the program will
default to 1:00 of work time.
6. You can use the “UP / DOWN” button to change the
amount of work time. Press the ENTER key when you are
finished.
