VirtuFit TR-200I Treadmill
21
EN
USER’S MODE OPERATION
COUNT-DOWN TRAINING
Power on the machine, press CLEAR/SET to enter TIME count-down training, press it again to enter DISTANCE
count-down training, press it once more to enter CALORIE countdown training. Finally press CLEAR/SET to
exit.
TIME COUNT-DOWN TRAINING
Power on the machine, press CLEAR/SET, TIME figure glitering, showing 30:00. Press SPEED+,- to choose
the time between 5-99minutes. Press START/STOP to start at speed of 1.0km/h. Speed can be adjusted by
pressing SPEED+,-. The machine stops when time shows 00:00.
DISTANCE COUNT-DOWN TRAING
Power on the machine, press CLEAR/SET two times, distance figure glitering, showing 1.0km. Press SPEED+,-
to choose the distance between 1.0-9.0km. Press START/STOP to start at speed of 1.0km/h.Speed can be
adjusted by pressing SPEED+,-. The machine stops when distance shows 0.00.
CALORIE COUNT-DOWN TRAINING
Power on the machine, press CLEAR/SET three times, calorie figure glitering, showing 50CAL. Press SPEED+,-
to choose the calorie between 10-990CAL. Press START/STOP to start at speed of 1.0km/h.Speed can be
adjusted by pressing SPEED+,-. The machine stops when calorie shows 0.
QUICK-START OPERATION
Press and release the START/STOP to begin belt movement, at 1.0 Km/h, then adjust to the desired speed
using the ‘+’ or ‘-’. You may also use the quick speed keys (3, 6 and 9) to adjust the speed. You can also use
‘speed +’ or ‘speed -’to adjust the speed on handrail. To slow the treadmill down, press and hold the ‘speed
-’ key to desired speed. You may also press the rapid speed adjust keys: 3, 6, 9.
• In a state of running, single press START/STOP, the walking belt will gradually slow down.
• In the state of running, single press CLEAR/SET will reset time, distance, calorie.
CONTROL PANEL
