VirtuFit Run Fit Foldable Treadmill
17
EN
This treadmill is designed in a way that in the event of an electrical fault, the machine will turn off
automatically to prevent any injuries to the user and to prevent damage to the machine (i.e. motor). When
the treadmill behaves erratically, simply reset the treadmill by turning the power switch off, waiting for 1
minute then turning the power button back on.
If, after you have reset the treadmill, it is still not running correctly, please run the self-checking analyse
(please refer to Self-Checking) to distinguish what type of error problem the machine is encountering.
Before attempting any work on the treadmill, ensure that the power is off and the plug is removed from
the power point. Do not use extension leads as it may lead to power decrease and failure.
ERROR CODE
DESCRIPTION
SOLUTION
E01
Signal failed between
computer and console
Sensor wire is broken or
not well connected.
Check if the wire is undamaged and properly connect-
ed, if so replace the circuit board of the computer or
console.
E02
Burst clash.
1. Check whether the supply voltage is 50% lower than
normal voltage, use the normal voltage for testing.
2. Check if the printed circuit board is burned, replace
the printed circuit board.
3. Check if the motor wire is properly connected, plug
it in again.
E03
No sensor signal
Overload protection.
1. Check if the light on the control board is on, if the
light is burned out, replace the light.
2. Check if the sensor plug is properly connected;
3. Check if the magnetic sensor is broken or properly
connected, reconnect or replace one magnetic sensor.
E05
Security key signal is not
recognized by the com-
puter.
Check that the motor is in good condition and that
there is something stuck between the conveyor belt
which increases the motor’s resistance. If all of the
above is correct, replace the console.
“----”
Communication error.
Check that the magnetic parts of the safety key are
properly inserted.
E07/E08
EEPROM damage.
Replace the console. Please contact your dealer.
TROUBLE SHOOTING
