VIRTUFIT iConsole FDR 2.1 User Manual Download Page 3

NL

VirtuFit iConsole FDR 2.1 Ergometer Crosstrainer

3

SAFETY INSTRUCTIONS

WARNING: BEFORE YOU BEGIN YOUR WORKOUT, WE RECOMMEND THAT YOU 

FIRST CONTACT YOUR HEALTH SPECIALIST, ESPECIALLY FOR PEOPLE OVER 35 

OR PEOPLE WHO ALREADY SUFFER FROM HEALTH PROBLEMS. WE ARE NOT 

LIABLE FOR ACCIDENTS IF YOU DO NOT FOLLOW OUR INSTRUCTIONS.

ATTENTION

ENG

The crosstrainer is only made for home use and is suitable for users up to 155kg. 

Carefully follow the steps of assembly. 

Use only original parts that are supplied. 

After delivery, check everything with the parts list before you start assembling.

Only use suitable tools for assembly and ask for help where necessary.

Place the crosstrainer on a flat surface and a stiff surface. Use in damp rooms is not 

 recommended. 

Check all parts for tightness before you train for the first time. We also recommend checking    

 

the parts every the parts every month. Replace broken parts immediately and do not use the    

 

crosstrainer if you have not yet replaced the part. Only use original spare parts for repair. Ask    

 

your dealer for advice on repairs. 

Avoid using aggressive cleaning agents when cleaning the crosstrainer.

Start training only after the cross trainer has been fully assembled and checked.

Be aware that all adjustable parts have a maximum number of settings to which they can be    

 adjusted.

The crosstrainer is made for adults. Make sure that children only use it when accompanied by an  

 adult. 

Inform users of potential danger, watch out for moving parts during use.

Warning: improper / excessive training can cause injuries.

Summary of Contents for iConsole FDR 2.1

































Reviews: