PROBLEM SOLUTIONS
14
VirtuFit iBiking Folding Bike
ENG
MAINTENANCE OF THE EXERCISE BIKE
Regular maintenance is important for optimal operation and to reduce wear. During use,
regularly check all parts of the exercise bike and tighten them securely. Replace worn parts
immediately by contacting the manufacturer. Use a damp cloth and a little soft soap to
clean the exercise bike.
IMPORTANT: keep liquids away from the control panel to prevent damage. Keep the
control panel away from direct sunlight.
Squeaky exercise bike
First lubricate all rotating parts with silicone spray. It can also be that a screw is tightened
too tightly or too loosely, this creates friction and therefore a beep. If this is the case, try to
find out exactly where the beep is coming from and then loosen or tighten this screw.
The screws should be tightened in such a way that they can always be released by hand.
Ticking noise when pedaling
This is probably caused by one of the pedals. Disassemble the trapper (s) and then reattach
them to the device. Be careful, the left-hand trapper has to be turned counterclockwise to
tighten, the right-hand trapper clockwise. Tighten the pedals securely. If this does not offer
the solution, report this to the supplier.
Heart rate display does not work
This can have various causes.
1. The sensor cables running from the heart rate sensor to the display are incorrectly fitted
or have come off during use.
2. It may be that the sensors have become damp, dirty or greasy, clean them regularly.
The console doesn’t work
Are there any other problems? Please contact your dealer.
-
When the display show Drawing D, it means the batteries need to be changed.
-
If there is no signal when you pedal, please check if the cable is well connected.
Drawing A
Drawing B
Drawing C
Drawing D
VirtuFit iBiking Folding Bike with Backrest
