VIRTUFIT HTR 3.0i, User Manual, Page: 23 / 35

EN
VirtuFit HTR 3.0i Hometrainer
23
CONTROL PANEL
PROGRAM
MANUAL PROGRAM
1. Press the MODE button to select the MANUAL mode, the display will show the standard profile of the
exercise and the RPM window will show the name of the program “P00”, press the MODE button to
enter the setting mode. Or don’t change the preset values, press START / STOP to start immediately.
Or press RESET to return to idle mode.
2. Press the MODE button to change the age. The display shows “AGE” and the window flashes “30”.
Press +/- to change the age. After the change is completed, press START / STOP to confirm and start
the program, or press the MODE button to move on to the next setting.
3. 3. Press the MODE button to change the weight. The display will show “WEIG” and the window will
flash “70”. Press +/- to change the weight. After the change is completed, press START / STOP to
confirm and start the program, or press the MODE button to move on to the next setting.
4. Press the MODE button to change the time. The display shows “TIME”. The TIME window flashes at
18:00 (to indicate the time setting). Use the +/- button to change the time. Press the START button to
confirm and start the program or press MODE to move to the next setting.
5. Press the MODE button to change the distance. The display shows “DIST”. The window flashes 5.00
(indicates the distance, change with the +/- button). When the change is completed, press the START
button to confirm and start the program, or press the MODE button to move to the next setting.
6. Press the MODE button to change the calories. The display will show “CAL”. The window flashes 200
(indicates the calorie setting, change with the +/- button). When the change is completed, press the
START button to confirm and start the program, or press the MODE button to end editing the settings.
7. Setup is complete. You can press START to start the program or press MODE to return to the first
option of the settings.
8. Time, distance, and calories can be set at the same time. When the countdown is complete, the
program ends. If the countdown is not set, the data will automatically be saved.
P01-P30 PRESET PROGRAMS
1. There are a total of 30 PRESET PROGRAMMES. Press the +/- button to select PROGRAM XX. The display
shows the pre-programmed PROFILE. The program name “PXX” is displayed in the RPM window.
Press the MODE button to enter the setup mode. Or do not change the preset value, press START /
STOP to start the program; or press RESET to return to idle mode.
2. Press the MODE button to change the age. The display shows “AGE” and the window flashes “30”.
Press +/- to change the age. After the change is completed, press START / STOP to confirm and start
the program, or press the MODE button to move to the next setting.
3. Press the MODE button to change the weight. The display will show “WEIG” and the window will flash
“70”. Press +/- to change the weight. After the change is completed, press START / STOP to confirm
and start the program, or press the MODE button to move to the next setting.