VIRTUFIT HTR 3.0i, User Manual

Page: 22 / 35

EN
VirtuFit HTR 3.0i Hometrainer
22
OPERATION
START THE WORKOUT
• Start exercise, pedal the machine pedals with both feet, press START/STOP, then TIME, SPEED,
DISTANCE, CALORIES function parameters will be calculated from zero.
• If the user wishes to set the desired TIME, DISTANCE, and CALORIES values, they can be set before
starting the machine. Setting procedure: Press MODE (mode button) to select the setting mode,
and the selected function value will flash. At this time, press up+/-DOWN (increase/decrease) to set
the desired value.
• After the value setting is finished, press the START/STOP button to start the machine and start
pedaling. The set function parameter value starts counting down. The machine stops automatically
until the parameter value counts back to zero.
NOTE!
• The machine system has a sleep function. When the speed sensing signal is not sensed in about
four minutes, the display will go to sleep. Press any key or pedal to wake up the display.
• Each machine is equipped with a power adapter. If the machine screen does not display, please
confirm that the power adapter is normal.
CONTROL PANEL