EN
VirtuFit Elite TR-500i Treadmill
21
TROUBLE SHOOTING
SIMPLE MALFUNCTION AND SOLUTION - TFT SCREEN
Communication error, from panel to driver
Solution:
• Check connect wire
• Change wire
• Change table
• Change driver
Stall protection
Solution:
• Check motor wire
• Check motor
• Check driver
No speed sign
Solution:
• Check speed sensor
• Change speed sensor
• Change driver
Incline learn fail
Solution:
• Check incline wire
• Check incline motor
• Check driver
There is no signal when power on
• First check whether the over load protector is open or not, if opened, please close it.
• Make sure the wire of the switch, over load protector and driver are connected well.
• Make sure the wire between the monitor and driver is connected well.
The display shows “E08” ----Storage wrong
• Storage IC is not in place, reconnect it to to IC seat and pay attention to the position of PIN1.
• Storage IC or the related wire is damaged ,change a new storage IC or driver.
