EN
VirtuFit CTR 3.0i Elliptical Trainer
16
HAND PULSE SENSORS
WARNING
Hand pulse sensors
This VirtuFit fitness equipment is provided with hand pulse sensors for measuring the heart rate. The hand
pulse sensors are located on the handlebars. The hand pulse sensors are only working if they are touched
both at the same time for a couple of seconds. For accurate measurement it is important to have slightly
moist hands and to use a constant pressure on the sensors. Too dry or too moist hands can result in less
accurate measurement of the heart rate.
NOTE!
Do not use the hand pulse sensor in combination with a wireless heart rate transmitter to prevent
errors.
Wireless heart rate monitor (Bluetooth)
This VirtuFit fitness machine is equipped with a wireless heart rate receiver. For heart rate measurement
with a wireless heart rate monitor, use a heart rate monitor that works on Bluetooth. With a wireless heart
rate monitor it is important that the electrodes are slightly moist and that the heart rate monitor fits well
on your body. Refer to your heart rate monitor owner’s manual for correct instructions. Incorrect use of the
heart rate monitor can cause an abnormal reading.
NOTE!
• A wireless heart rate transmitter does not come standard with this fitness equipment. Contact
your dealer for purchasing.
• Do not use the wireless heart rate transmitter in combination with the hand pulse sensors to
prevent errors.
• Consult a physician if you have a pacemaker, before using a wireless heart rate transmitter.
• If there are more than one heart rate measurement devices in one room, please make sure to keep
distance to the other devices to prevent inaccurate measurement or errors.
• Alway try to keep the wireless heart rate transmitter in a close distance of 1 meter from the console.
• Always wear a wireless heart rate transmitter directly on the body under your clothes.
TRAIN ON HEART RATE
