Virtue Sensation Owner’s Manual
http://www.virtueaudio.com
Page 5 of 5
•
Banana plugs, the most convenient option, are inserted in the back of the Propeller Post
TM
•
Spades are slid over the binding post shaft, behind the post collar, and the Propeller Post
TM
can
then be tightened.
•
Bare wire can be wrapped around the post or inserted through the rear hole and tightened.
You may connect speakers with an impedance of anywhere from 2 ohms to 16 ohms, without problem.
Low impedances may cause the amp to shut down; higher impedances may not have optimum
frequency response. But, you’ll be fine with the vast majority of speakers on the market. Running the
amp without speakers will not harm it.
