SOLO GA1 | User’s manual
18
Anomaly
Possible Cause
Solution
PFD/MFD do not interact with
simulation software.
Only one of the PFD/MFD screens is
detected by the PC.
Check that each screen has a different selector
mode switch value (PFD or MFD) as described in
Section 3.1.
PFD/MFD are not set in the correct
mode for the flight simulation software
used.
In the device's region inf the VFHub Dashboard, a
"No Direct Mode: PFD" or "No Direcct Mode MFD" is
present. Change the PFD/MFD screen in "No Direct
Mode" to "Direct Mode" by pressing "VS" and "FLC"
buttons simultaneously in the device.
PFD and MFD are not detected by
your flight simulator computer.
Make sure SOLO GA1, PFD and MFD receives 12v
power. Also check in the Flight simulation computer
that “Virtual Fly – PFD DIRECT” and “Virtual Fly –
MFD DIRECT” are detected.
VFHub is not running on flight
simulation computer.
Execute VFHub on the flight simulation. and check if
PFD and MFD are connected.
Audio Panel's buttons do a
double-press when clicking it.
In X-Plane 11, Audio Panel's
assignations have not been disabled
with a blank profile.
Find the datailed step on how to set up a blank
profile in:
https://downloads.virtual-fly.com/docs/
vfhub/latest/setting_up_a_blank_profile.pdf
.
5. TROUBLESHOOTING
