4: Installing a GW7000 Series router outside the UK
4.2
GW7000 Series serial and model descriptions outside the UK
When you receive your GW7000 package retain the outer packaging. The label containing
the model number, serial number (S/N) and part number (P/N) is located on the side of the
packaging box.
Each GW7000 is assigned a unique serial number. Record your device serial number on a
printed copy of your warranty or somewhere you can easily access it. You must reference
your unique serial number (S/N) when you contact your distributor or Virtual Access support
for installation and configuration confirmation or should you request service on the device.
Figure 7: The model number on the side of the packaging
Unpack the contents. There is a corresponding silver label located on the bottom of the
router.
If your GW7000 Series router has dual ADSL, a second purple ADSL cable is provided.
If your GW7000 Series router has a serial port, you need a serial cable. We do not provide a
serial cable with the GW7000 Series router with a serial port. You can buy a serial cable
from your distributor. Make sure that the serial cable that you buy complies with the
interface that you use.
4.3
GW7000 series model descriptions
In the table below, match your model number. Check that all the parts are in your package
before you install your router.
If there is a 'Y' in a field, you should have that part. If there is a 2 in a field, you should have
two parts. If there is an ‘O’ in a field, it is an optional part. If you are missing any parts,
please contact your distributor.
Installing a GW7000 Series Router
© Virtual Access Ltd.
Issue 1.3
Page 13 of 19
